K2 Audio Bluetooth Express 20W Bluetooth In Wall Amplifier
Easily add music to your kitchen, bedroom, study, bathroom etc. This tiny wall mount amplifier fits into a standard UK two gang pattress and provides a powerful 20W RMS per channel.
The K2 Audio BTXP Bluetooth Express amplifier allows you to add music to more rooms than ever before possible.
- Up to 20W RMS per channel
- Low distortion Digital Class D design means high efficiency with minimal heat produced
- Fully Automatic fit and forget design
- Ultra low current draw in standby (less than 20mA = 0.3W @15vDC)
- Supports Bluetooth SSP for quick pairing.
- Supports A2DP Codecs: SBC, MPEG1,2 audio / mpeg2,4 AAC /ATRAC /APTX
- LED's for status and confirmation
- Flush mount or surface mount (25mm depth)
- Detachable speaker connectors for easy install.
AUTOMATICALLY TURNS ON
The K2 Audio BTXP Bluetooth Express is extremely easy to install and to use. Once installed you pair your bluetooth device, then you simply press play on your device, the amplifier wakes up to deliver powerful audio.
When you stop playing the amplifier automatically switches into very low power standby mode. Whenever you connect again it instantly wakes up to deliver clear powerful audio.
There are no switches or remote controls, it really is a fit and forget solution. Simply press play when you want to listen to high quality music!
The K2 Audio BTXP Bluetooth Express is very easy to install, it mounts in a 2G UK electrical socket box (surface or flush) you connect the included power supply and then connect two speakers of your choice.
Pair your phone, and press play!
During installation you can choose from one of seven Bluetooth ID's to make sure you are always connecting to the correct amplifier. This means that you can install up to seven units within range of each other and have no conflict issues.
WHAT YOU GET
- 1 x K2 Audio BTXP Bluetooth Express Amplifier
- 1 x Power Supply Input: 100-240v AC Output: 15v DC 4.0A
- 1 x Screwdriver
- Fixing screws
- Instruction sheet
Please note that this item does not include speakers, however we have various speaker options available.
- Bluetooth Audio Modes: A2DP Codecs: SBC, MPEG1,2 audio / mpeg2,4 AAC /ATRAC /APTX
- Power output (15v supply): 20W RMS per channel into 4ohms
- Power output (12v supply): 18W RMS per channel into 4ohms
- Total Harmonic Distortion + Noise: 0.15% (4ohm load, 1KHz, 8W power)
- Bandwidth: 20Hz to 22KHz Passive limitation built in
- Power Supply: 12V to 18V (absolute max 18V DC) minimum current 3.0A. Connection via a 2.1mm DC connector centre positive, auto mute on under voltage.
- Fuse: self resetting 3A built in to clear remove power for at least 20 seconds, clear fault and reconnect
- Amplifier topology: full bridge mode all speaker connections are live ( no common ground connection)
- Recommended min speaker impedance:4 ohms per channel
- Absolute minimum speaker impedance: 3 ohms per channel
- SNR: 98dB
- Voltage gain: 33dB
- Input required to produce full output: approx 775mV
- Standby current: 20mA (0.3W at 15v supply)
- Loudpeaker wire size: solid min 0.14mm2 max 2.5mm2, stranded min 0.14mm2 max 1.5mm2